CHEMICAL PUMP
-
Chemical Pumps, Pumping Sea Sanso PMD Magnet Type
Chemical pump Sanso PMD Magnet Type (Magnet pump) products imported from Japan. Suitable for use in the circulatory system, such as water and liquid chemicals used in wastewater treatment. Fresh liquid chemicals Solar thermal systems And is used as an aquarium pump and carefully designed. To prevent leakage of liquid And corrosion properties of water and chemicals.
-
Condensate Removal Pump LITTLE GIANT Series VCC
Low Profile Tank
Applications- For removal of condensate from an air conditioner, suitable for high efficiency and gas furnace condensation
- 1/30 hp motor
- Low profile for limited space applications
- ABS tank, motor cover, and volute
- 3/10 gallon tank capacity
- Stainless steel shaft
- Removable 3/8″ (9.5 mm) barbed check valve
- Thermal overload protection
- Safety switch
- cCSAus
-
Metering Pump Dosser MSJ Series
DOSSER MSJ series solenoid diaphragm metering pump is effective and reliable digital pump. The solenoid shaft is sucked by the magnetic wire and pushed back by the spring, which makes the diaphragm in the dosing head suck and discharge. The check valves which with double balls prevent backflow when pumping.The precise dosing can be controlled both by the stroke length and stroke speed manually. The capacity range is from 1.0l/h to 15l/h at a back pressure from 15 bars to 1bar. All most any chemical with low viscosity can be dosed with MSJ solenoid diaphragm metering pump.It is an economical meterng pump widely used in dosing applicaitons.
-
Metering Pump DOSSER DOSSER MSJ-S
MSJ-S series solenoid diaphragm metering pump is DOSSER newly designed digital pump with an advanced microprocessor control board. The innovative big LED screen display the instant flow rate and the accumulated flow for easy reading. It has the same advantage of MSJ manual model. The precise dosing can be controlled by the stroke speed both manually and automatically.
-
Metering Pump Dosser MMG1 Series
MMG1 mechanical diaphragm metering pump is DOSSER heavy-duty designed process pump for chemical dosing. It is reliable pump require minimal maintenance with high performance. It has long-term cost benefits of low lifecycle cost. Double-diaphragm design is available for sensitive liquid dosing. Each pump is with the reinforced plate to protect the diaphragm to increase the working life. Both stroke length and stroke speed can be adjusted to alter capacity.
-
Metering Pump Dosser MMG2 Series
Dosser MMG2 series mechanical diaphragm metering pumps are robust and reliable motor driven diaphragm metering pumps. It is heavy-duty and compact designed with high quality performance.The diaphragm is five-layer composite PTFE diaphragm with reinforced plate at the back.It is a reliable pump benefits long-term cost.
-
Condensate Removal Pump LITTLE GIANT Series VCL
Plenum Rated Low Profile VCC Series
Applications
Designed for automatic collection and removal of condensate from air conditioning, refrigeration, and dehumidification equipment installed in air handling and plenum applications having limited space and where gravity drainage is not possible or practical.
The VCC-20-P is constructed with plastics that have been tested by Underwriter’s Laboratories’ to UL Standard 2043 “Fire Test for Heat and Visible Smoke Release for Discrete Products and Their Accessories Installed in Air Handling Spaces”. -
Metering Pump Dosser MMJ1 Series
DOSSER MMJ1 series mechanical diaphragm metering pumps are spring type pumps with micro motor and reducer. It is robust and oil-free design. The rated power is only 60W, while the max pressure can be up to 10 bars, and max capacity can be up to 130lph. It is an ideal metering pump for all chemical dosing applications.
-
Transfer Rotary Lobe Pumps DOSSER
Rotary Lobe Pump is a positive displacement pump, which has two rotors in the pump head. The two rotors fixed on two shafts and rotate syn-chronically in counter direction. The rotation creates vacuum volume on the inlet side. The liquid is sucked into the pump head and travels around in the chamber between the rotor and the pump head casing, and is forced out on the outlet side.
-
Chemical pumps, pumping sea Sanso PMD Magnet Type (IP44)
Chemical pumps and pumping sea Sanso “Sun chain” PMD Magnet Type A International protection (IP44) The pumps are suitable for use in water circulation in the aquarium. The plain water and salt water Use of hair transplant renewable chemicals and solvents. Water transfer system In water Ice Machine And the installation of water treatment equipment. Transfer and cooling system
-
Chemical pumps, pumping sea Sanso PMD Magnet Type (IP44) High power type
Pumps, chemicals and pumped seawater Sanso “Sun chain” PMD Magnet Type A International protection (IP44) version (High Power Type) motor capacity of not less than 1.5 kw. Available in all five models, namely PMD-15013 (50Hz). , PMD-15013 (60Hz), PMD-22013 (50Hz), PMD-22013 (60Hz) and the PMD-37013 (60Hz).
-
chemical pump Sanso PMDS A pump in the tank
Sanso PMDS pump chemicals contained in the pump. (Self-priming magnet pump) new products, good quality, imported from Japan. Suitable for use in the circulatory system, liquid chemicals and sea water (brine) and in the circulation of the coolant pump, tank, etc. can be removed for use as a normal pump. The strong anti-noise pump fluid leak ooze. And resistance to chemical corrosion and sea excellent.
-
chemical pump Sanso PMD Series Magnet Type For hot water
Pumps, chemicals Sanso PMD Series Magnet Type (For Hot Water) for hot water generation. It is suitable for fluid temperatures from -20 to 90 degrees as a dishwasher. And drinking water (Hot / cold), etc. are available in all nine models include PMD-0311, PMD-0411, PMD-111, PMD-121, PMD-331, PMD-521 (50Hz), PMD-521 (50Hz). , PMD-1521 and the PMD-1523.
-
chemical pump Sanso PMD Magnet Type For hot and cold water
Pumps, chemicals Sanso PMD Magnet Type (for hot and cold water) version for use with hot and cold water. Ideal for circulating water in heating and refrigeration. Supports temperatures from -20 to 90 degrees available in two versions of the PMD-711B and PMD-141B.
-
Koshin Pump PP Series
Squeeze the hand pump oil from PP Series models Koshin (Made in Japan) is available in all versions of the two PP-25 is an oil pump a hand squeeze. The production of plastic materials is strong. Compatible with oil type B (fuel oil B), kerosene (Kerosene) Diesel (Diesel) and can also be used to pump water. And White (Wine) and PP-25C is the next generation solution for certain types of Solvent
-
Koshin Pump PH Series
Squeeze the hand pump oil from PH Series Koshin (Made in Japan) is an oil pump squeeze. The production of plastic materials is strong. Can be used to pump kerosene (Kerosene), gasoline (Gasoline) Diesel (Diesel oil) solution (Solvent) and water (Water (Non-potable)) small and lightweight. Easy to carry to work. There are two models to choose from all the PH-10 and PH-20.
-
Koshin Pump GM Series
Pump oil from GM Series Koshin (Made in Japan) is an oil pump. DC Motor Can be used with batteries The pump is lightweight, easy to move. Can be used for pumping oil, diesel oil, such as various types of valves for the liquid passes through a pump problem. Noise at work The connection to the pipe size 25 mm. (1 “).
Thai
